Merbau One Strip Engineered Select 5G 136 x 14 mm

Engineered Flooring 136 mm x 14 mm

Engineered overlay floors can only be laid over an existing subfloor, not as a structural floor. Overlays are made up of a top layer of precious hardwood with a ply backing, meaning this floor has the same beautiful appearance of solid wood but is a much more efficient and sustainable use of material.
With a 3mm thick wear layer and 14mm thick in total, this factory lacquered Ekowood floor is ideal for both floating and fully bonded installations.

The exotic yellows and browns of Merbau bring a beautiful richness to the home.

This species is a much more sustainable choice for high-end refurbishments as an alternative to timbers such as Mahogany or other exotic hardwoods.

This floor is manufactured in Malaysia to a quality standard that adheres to our high expectations.

The Ekowood 5G Clic system allows for quick and easy laying without the need for glue.

The Ekowood range is available in 3 Strip and 1 Strip wide plank.

Many floors in this range are suitable for under floor heating.
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.

Floor Size: 0m2

Packs: Variable pack size

£41.67 / m2 + VAT

Product codeMELS/136

14mm thick with a 3mm veneer and factory lacquered, Ekowood is ideal for both free floating and fully bonding installations.

Many floors from this range are suitable for installation over underfloor heating.

Also available in the following sizes:
Merbau Three Strip 195mm

This flooring is manufactured in Malaysia, adhering to our high standards of engineering.

Product code: MELS/136

Grade: Select

Species: Merbau

Group: Engineered Flooring

Category: Engineered Overlay

Type of Finish: Lacquered

Brushed: No

Profile: Click System

Specification: Non-bevelled

Unit Weight: 11kg

Pack size: 2.32

Size: 136 x 14 mm

Width: 136 mm

Thickness: 14 mm

Suitable for underfloor heating: Yes

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.

Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Engineered Click System: This product has a 5G click joining system rather than a traditional Tongue & Groove.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Pre-Lacquered: This product is supplied with a Factory UV Lacquered surface. This product is suitable to walk on immediately.

Have no product in the cart!