Oak Antique Oiled 210 x 15 mm

Engineered Flooring 210 mm x 15 mm

Our engineered oak overlay flooring meets modern requirements and keeps a traditional wood flooring appearance. The multiple layers of plywood backing give support to the visible top layer of the precious hardwood, resulting in a floor that looks and feels like a solid wood floor but that is suitable for under floor heating and can still be sanded and re-finished after years of use. An overlay floor must be laid over an existing subfloor.

Oak is a versatile species that takes pigments very well, so it lends itself well to pre-sealed flooring. The physical characteristics that give Oak its charm are still visible through the finish, so this floor has a naturally charming character and can be matched with the desired design scheme.

Antique oiled Oak has a rich and deep brown overtone, accentuating the grain of the wood to give an antique character.

A wide floor enhances the atmosphere of a room, particularly in large spaces, and gives a modern and elegant feel to any project.

£57.08 / m2 + VAT

Product codeOLOAO/210

Order a sample
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to a ply subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory Oiled ready to use.
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor.

Product code: OLOAO/210

Grade: Millrun Grade, contains knots & Colour variation

Species: Oak

Group: Engineered Flooring

Category: Engineered Overlay


Type of Finish: Pre-oiled

Brushed: No

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 11kg

Size: 210 x 15 mm

Width: 210 mm

Thickness: 15 mm


Suitable for underfloor heating: Yes

Nail Fitting

Stick Down

Floating

Under Floor Heating

Engineered

Micro Bevelled

Pre-Oiled


Have no product in the cart!
0