Oak Band Sawn Effect Unsealed 240 x 20 mm

This product is no longer available

Engineered Flooring 240 mm x 19 mm

The versatile nature of Oak means this floor is perfect for all kinds of design scheme. From more traditional, natural looking styles to more contemporary, coloured finishes, Oak can be tailored to your preference.

Our engineered wood flooring meets modern requirements and keeps a traditional wood flooring appearance. The multiple layers of plywood backing give support to the visible top layer of the precious hardwood, resulting in a floor that looks and feels like a solid wood floor but that is suitable for under floor heating, can be laid over almost all types of sub floor, and can still be sanded and re-finished after years of use.

This type of flooring gets its name from traditional sawing techniques and the marks that the saw left behind when it skimmed the surface of the wood. The bandsawn effect has a more rugged, textured surface, creating a very trendy appearance.

Boards above 240 mm have a very contemporary feel and create a modern, streamline look. However, contrary to what many believe, wide boards aren’t just for large, open-plan rooms. With fewer joins than narrower boards, wide boards create a seamless clean look, so there’s less to distract the eye. This can really help to open up a space and shows off all the beauty of the timber in the process.

Unsealed products provide the flexibility to finish the wood in any colour once the floor is fitted. This gives you the option to have a completely bespoke floor, tailored to your personal preference.

Please note that this is a special product that’s made to order, with an approximate lead time of 4-6 weeks. Please speak to one of our wood flooring experts for exact timings.

£91.67 / m2 + VAT

Product codeOLBSU/240

This product is no longer available. Please contact us for further information.

020 8871 9771

We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The unsealed board is supplied with a micro bevel along the length of the board, pre- sanded requiring only a light 100/120 grit sand to finish.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.

Product code: OLBSU/240

Grade: Millrun Grade, contains knots & Colour variation

Species: Oak

Group: Engineered Flooring

Category: Engineered Board


Type of Finish: Unsealed

Brushed: Light

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 14.5kg

Size: 240 x 19 mm

Width: 240 mm

Thickness: 19 mm


Suitable for underfloor heating: Yes

Nail Fitting

Stick Down

Floating

Engineered

Micro Bevelled

Under Floor Heating


Have no product in the cart!
0