Oak Clear Lacquered 180 x 15 mm

Engineered Flooring 180 mm x 15 mm

Our lacquered floors give a subtle boost to the wood surface but still retain a natural look and feel. The light tones of Oak mature from a pale tan-biscuit hue to a more honeyed look.

Our engineered overlay wood flooring meets modern requirements and keeps a traditional wood flooring appearance. The multiple layers of plywood backing give support to the visible top layer of the precious hardwood, resulting in a floor that looks and feels like a solid wood floor but with a much more efficient use of precious material and that can still be sanded and re-finished after years of use. An overlay floor must be laid over an existing subfloor.

£52.50 / m2 + VAT

Product codeOLOCLF/180

Order a sample
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to a ply subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory lacquered ready to use.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor.

Product code: OLOCLF/180

Grade: Millrun Grade, contains knots & Colour variation

Species: Oak

Group: Engineered Flooring

Category: Engineered Overlay


Type of Finish: Pre-lacquered

Brushed: No

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 11kg

Size: 180 x 15 mm

Width: 180 mm

Thickness: 15 mm


Suitable for underfloor heating: Yes

Under Floor Heating

Engineered

Pre-Lacquered

Micro Bevelled

Floating

Nail Fitting

Stick Down


Have no product in the cart!
0