Oak Coastal Grey Oiled 210 x 20 mm

Engineered Flooring 210 mm x 20 mm

The beauty of Coastal Grey is that it combines the fashionable shade of grey with warm sandy tones and a weathered, textured surface. The grey coloured oil adds interest by picking up the wood's distinctive grain patterns and rustic knots, creating a look that’s subtle enough to go with all décor schemes.

This is a versatile floor that will go with almost anything. There’s lots of variation with the colour and grain patterns, so this is a floor that you will never tire of. It will just get better and better over time.

Oak is a versatile species that takes pigments very well, so it lends itself well to pre-sealed flooring. The physical characteristics that give Oak its charm are still visible through the finish, so this floor has a naturally charming character and can be matched with the desired design scheme.

Our engineered wood flooring meets modern requirements and keeps a traditional wood flooring appearance. The multiple layers of plywood backing give support to the visible top layer of the precious hardwood, resulting in a floor that looks and feels like a solid wood floor but that is suitable for under floor heating, can be laid over almost all types of sub floor, and can still be sanded and re-finished after years of use.

The wide board format is perfect for large open spaces, as generous room proportions will enhance the quality and splendour of this floor’s gorgeous finish.

£71.66 / m2 + VAT

Product codeOLCGO/210

Order a sample
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory Oiled ready to use
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.

Product code: OLCGO/210

Grade: Millrun Grade, contains knots & Colour variation

Species: Oak

Group: Engineered Flooring

Category: Engineered Pre-Oiled


Type of Finish: Pre-oiled - An additional coat of oil is recommended.

Brushed: No

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 15kg

Size: 210 x 20 mm

Width: 210 mm

Thickness: 20 mm


Suitable for underfloor heating: Yes

Under Floor Heating

Engineered

Pre-Oiled

Floating

Nail Fitting

Stick Down

Micro Bevelled


Have no product in the cart!
0