Oak Ebony Oiled 160 x 20 mm

Engineered Flooring 160 mm x 20 mm

The look of an Ebony oiled floor is actually lighter than the name suggests, as it’s the grain which is enhanced with the rich dark oil. The rest of the oak features lighter mid-brown tones, making this a very easy going floor.
This floor has been brushed to remove grain, so that the colour deposits more deeply in the surface, giving a more textured appearance.

Engineered wood floors are appropriate for installation over under floor heating because of their stability and moisture content.
Engineered flooring can be fitted in most rooms in the house and laid on almost all types of subfloor.

Oak is a versatile species that takes pigments very well, so it lends itself well to pre-sealed flooring. The physical characteristics that give Oak its charm are still visible through the finish, so this floor has a naturally charming character and can be matched with the desired design scheme.

£61.67 / m2 + VAT

Product codeOLEO/160

Order a sample
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory Oiled ready to use
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.

Product code: OLEO/160

Grade: Millrun Grade, contains knots & Colour variation

Species: Oak

Group: Engineered Flooring

Category: Engineered Pre-Oiled


Type of Finish: Pre-oiled - An additional coat of oil is recommended.

Brushed: Light

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 15kg

Size: 160 x 20 mm

Width: 160 mm

Thickness: 20 mm


Suitable for underfloor heating: Yes

Under Floor Heating

Engineered

Micro Bevelled

Pre-Oiled

Floating

Nail Fitting

Stick Down


Have no product in the cart!
0