Oak Natural Lacquered 160 x 20 mm

Engineered Flooring 160 mm x 20 mm

The distinctive knots of our natural Oak give this floor a charming character that will bring a truly unique look to a home.
This finish retains the natural characteristics of the timber, letting the lighter hue of the Oak speak for itself.

Our engineered wood flooring meets modern requirements and keeps a traditional wood flooring appearance. The multiple layers of plywood backing give support to the visible top layer of the precious hardwood, resulting in a floor that looks and feels like a solid wood floor but that is suitable for under floor heating, can be laid over almost all types of sub floor, and can still be sanded and re-finished after years of use.

£55.00 / m2 + VAT

Product codeOLNF/160

Order a sample
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, Factory lacquered ready to use

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.

Product code: OLNF/160

Grade: Natural

Species: Oak

Group: Engineered Flooring

Category: Engineered Pre-Lacquered


Type of Finish: Pre-lacquered

Brushed: No

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 15kg

Size: 160 x 20 mm

Width: 160 mm

Thickness: 20 mm


Suitable for underfloor heating: Yes

Nail Fitting Nail fixing is usually done via a nail gun, e.g Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.

Stick Down Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Floating A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.

Under Floor Heating

Engineered 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Micro Bevelled Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.

Pre-Lacquered This product is supplied with a Factory UV Lacquered surface. This product is suitable to walk on immediately.


Have no product in the cart!
0