Oak Natural Oiled 100 x 15 mm 22.4m2

Engineered Flooring 100 mm x 15 mm

A SET SQUARE METERAGE OF 22.4m2 AT A FIXED PRICE.

THERE IS ONLY ONE JOBLOT OF THIS PRODUCT!

Was £896.00 Excluding VAT

FINAL REDUCTION £625.00 EXCLUDING VAT

MUST BE COLLECTED WITHIN 7 DAYS OF PURCHASE

The distinctive knots of our natural Oak give this floor a charming character that will bring a truly unique look to a home.

Our engineered overlay wood flooring meets modern requirements and keeps a traditional wood flooring appearance. The multiple layers of plywood backing give support to the visible top layer of the precious hardwood, resulting in a floor that looks and feels like a solid wood floor but that is suitable for under floor heating and can still be sanded and re-finished after years of use. An overlay floor must be laid over an existing subfloor.

Traditional boards are about 125 mm wide, so any floor of this width will suit the proportions of older properties, especially those from the Victorian era. Narrow boards can be used effectively in all rooms and look particularly stunning in open warehouse style apartments and rooms with high ceilings.

The warm and rich tone of the wood is emphasised by the finish, which has no added colouring. Clear Oil accentuates the natural characteristics of the species, letting the golden honeyed tones come through.
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

£27.90 / m2 + VAT

Product codeJOB/1832

There are no samples available for this product
020 8871 9771

A SET SQUARE METERAGE OF 16.2m2 AT A FIXED PRICE.

THERE IS ONLY ONE JOBLOT OF THIS PRODUCT!

Was £648.00 Excluding VAT

FINAL REDUCTION £539.95 EXCLUDING VAT

Product code: JOB/1832

Grade: Natural

Species: Oak

Group: Engineered Flooring

Category: Joblot


Type of Finish: Oiled - An additional coat is recommended.

Brushed: Light

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 9kg

Pack size: 22.4

Size: 100 x 15 mm

Width: 100 mm

Thickness: 15 mm


Suitable for underfloor heating: Yes

Nail Fitting: Nail fixing is usually done via a nail gun, e.g Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.

Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.

Pre-Oiled: This product is supplied with a Factory UV Oiled surface. The Natural Wood Floor Company recommends that an additional coat of oil is applied to the surface prior to regular use.


Have no product in the cart!
0