Oak Natural Oiled 125 x 15 mm

Engineered Flooring 125 mm x 15 mm

The distinctive knots of our natural Oak give this floor a charming character that will bring a truly unique look to a home.

Our engineered overlay wood flooring meets modern requirements and keeps a traditional wood flooring appearance. The multiple layers of plywood backing give support to the visible top layer of the precious hardwood, resulting in a floor that looks and feels like a solid wood floor but that is suitable for under floor heating and can still be sanded and re-finished after years of use. An overlay floor must be laid over an existing subfloor.

Traditional boards are about 125 mm wide, so any floor of this width will suit the proportions of older properties, especially those from the Victorian era. Narrow boards can be used effectively in all rooms and look particularly stunning in open warehouse style apartments and rooms with high ceilings.

The warm and rich tone of the wood is emphasised by the finish, which has no added colouring. Clear Oil accentuates the natural characteristics of the species, letting the golden honeyed tones come through.

£40.00 / m2 + VAT

Product codeOLONO/125

Order a sample
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to a ply subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory Oiled ready to use.
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor.

Product code: OLONO/125

Grade: Natural

Species: Oak

Group: Engineered Flooring

Category: Engineered Overlay


Type of Finish: Pre-oiled

Brushed: Light

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 11kg

Size: 125 x 15 mm

Width: 125 mm

Thickness: 15 mm


Suitable for underfloor heating: Yes

Nail Fitting

Stick Down

Floating

Under Floor Heating

Engineered

Micro Bevelled

Pre-Oiled


Have no product in the cart!
0