Oak Natural Oiled 135 x 20 mm

Engineered Flooring 135 mm x 20 mm

The distinctive knots of our natural Oak give this floor a charming character that will bring a truly unique look to a home.
Oak is a versatile species that takes pigments very well, so it lends itself well to pre-sealed flooring. The physical characteristics that give Oak its charm are still visible through the finish, so this floor has a naturally charming character and can be matched with the desired design scheme.

Narrow boards can be used effectively in all rooms and look particularly stunning in open warehouse style apartments and rooms with high ceilings.

The warm and rich tone of the wood is emphasised by the finish, which has no added colouring. Oil finishes penetrate into the wood to protect the timber and in doing so, enhance the grain. This adds depth to the wood's natural appearance in the process.

With an engineered floor, you get the same look and feel of a traditional solid wood floor but with the added benefits of more efficient use of precious materials, superior construction, and compatibility with under floor heating.

£50.42 / m2 + VAT

Product codeOLNO/135

Order a sample
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory Oiled ready to use
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.

Product code: OLNO/135

Grade: Natural

Species: Oak

Group: Engineered Flooring

Category: Engineered Pre-Oiled


Type of Finish: Pre-oiled - An additional coat of oil is recommended.

Brushed: Light

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 13kg

Size: 135 x 20 mm

Width: 135 mm

Thickness: 20 mm


Suitable for underfloor heating: Yes

Nail Fitting

Stick Down

Floating

Under Floor Heating

Engineered

Micro Bevelled

Pre-Oiled


Have no product in the cart!
0