Oak Premier Lacquered 210 x 20 mm

Engineered Flooring 210 mm x 20 mm

Premier Oak has a more uniform and cleaner look that brings a refined elegance to a home. The lower knot content of premier Oak gives a more contemporary appearance.
Oak is a versatile species that takes pigments very well, so it lends itself well to pre-sealed flooring. The physical characteristics that give Oak its charm are still visible through the finish, so this floor has a naturally charming character and can be matched with the desired design scheme.

Engineered wood floors are suitable for kitchens, bathrooms, utility rooms, and any other room in the house because of their greater stability and lower moisture level in the wood.

Engineered wood floors are appropriate for installation over under floor heating because of their stability and moisture content.

This finish retains the natural characteristics of the timber, letting the lighter hue of the Oak speak for itself.

The wide board format is perfect for large open spaces, as generous room proportions will enhance the quality and splendour of this floor’s gorgeous finish.

£80.00 / m2 + VAT

Product codeOLPRF/210

Order a sample
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, Factory lacquered ready to use

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.

Product code: OLPRF/210

Grade: Premier

Species: Oak

Group: Engineered Flooring

Category: Engineered Pre-Lacquered


Type of Finish: Pre-lacquered

Brushed: No

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 15kg

Size: 210 x 20 mm

Width: 210 mm

Thickness: 20 mm


Suitable for underfloor heating: Yes

Under Floor Heating

Engineered

Pre-Lacquered

Micro Bevelled

Floating

Nail Fitting

Stick Down


Have no product in the cart!
0