Oak Premier Oiled 135 x 20 mm

Engineered Flooring 135 mm x 20 mm

SPECIAL OFFER PRICE:

Was £58.75 Now £50.00 per m2 Excluding VAT

Oak is a versatile species that takes pigments very well, so it lends itself well to pre-sealed flooring. The physical characteristics that give Oak its charm are still visible through the finish, so this floor has a naturally charming character and can be matched with the desired design scheme.

Premier Oak has a more uniform and cleaner look that brings a refined elegance to a home. The lower knot content of premier Oak gives a more contemporary appearance.

With an engineered floor, you get the same look and feel of a traditional solid wood floor but with the added benefits of more efficient use of precious materials, superior construction, and compatibility with under floor heating.

Narrow boards are a great option for smaller spaces, helping to open up the space to give it a larger appearance.

Oil finishes penetrate into the wood to protect the timber and in doing so, enhance the grain. This adds depth to the wood's natural appearance in the process.
Oiled finishes are very popular as they have a natural look and feel, so simply add to the appearance of the wood.

£50.00 / m2 + VAT

Product codeOLPRO/135

Order a sample
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory Oiled ready to use
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.

Product code: OLPRO/135

Grade: Premier

Species: Oak

Group: Engineered Flooring

Category: Engineered Pre-Oiled


Type of Finish: Pre-oiled - An additional coat of oil is recommended.

Brushed: No

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 15kg

Size: 135 x 20 mm

Width: 135 mm

Thickness: 20 mm


Suitable for underfloor heating: Yes

Nail Fitting

Stick Down

Floating

Under Floor Heating

Engineered

Micro Bevelled

Pre-Oiled


Have no product in the cart!
0