Oak Premier Oiled 180 x 20 mm

Engineered Flooring 180 mm x 20 mm

Premier Oak has a more uniform and cleaner look that brings a refined elegance to a home. The lower knot content of premier Oak gives a more contemporary appearance.

The ply backing of an engineered floor with a hardwood veneer glued on top gives our engineered floors the same beautiful appearance of a solid wood floor but with superior construction, greater stability, and compatibility with under floor heating.

The warm and rich tone of the wood is emphasised by the finish, which has no added colouring. Oiled finishes are very popular as they have a natural look and feel, so simply add to the appearance of the wood.

£73.34 / m2 + VAT

Product codeOLPRO/180

Order a sample
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory Oiled ready to use
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.

Product code: OLPRO/180

Grade: Premier

Species: Oak

Group: Engineered Flooring

Category: Engineered Pre-Oiled


Type of Finish: Pre-oiled - An additional coat of oil is recommended.

Brushed: Light

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 15kg

Size: 180 x 20 mm

Width: 180 mm

Thickness: 20 mm


Suitable for underfloor heating: Yes

Under Floor Heating

Engineered

Micro Bevelled

Pre-Oiled

Floating

Nail Fitting

Stick Down


Have no product in the cart!
0