020 8871 9771
logo

Oak Premier Unsealed 240 x 20 mm

Engineered Flooring 240 mm x 20 mm

Oak premier engineered floor in lounge with striped armchair, flooring available at the Natural Wood Floor Company, London SW18 1EG
Boards above 240 mm have a very contemporary feel and create a modern, streamline look. However, contrary to what many believe, wide boards aren’t just for large, open-plan rooms. With fewer joins than narrower boards, wide boards create a seamless clean look, so there’s less to distract the eye. This can really help to open up a space and shows off all the beauty of the timber in the process.

Our engineered wood flooring meets modern requirements and keeps a traditional wood flooring appearance. The multiple layers of plywood backing give support to the visible top layer of the precious hardwood, resulting in a floor that looks and feels like a solid wood floor but that can be laid over almost all types of sub floor, and can still be sanded and re-finished after years of use.

The light tones of Oak mature from a pale tan-biscuit hue to a more honeyed look. Premier Oak has a more uniform and cleaner look that brings a refined elegance to a home. The lower knot content of premier Oak gives a more contemporary appearance.

Unsealed products can be used to introduce a particular shade into a design scheme and are also ideal for colour-matching with an existing look.
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

£87.08 / m2 + VAT

Product codeOLPRU/240

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The unsealed board is supplied with a micro bevel along the length of the board, pre- sanded requiring only a light 100/120 grit sand to finish.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.

Product code: OLPRU/240

Grade: Premier

Species: Oak

Group: Engineered Flooring

Category: Engineered Board

Type of Finish: Unsealed

Brushed: No

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 14.5kg

Size: 240 x 20 mm

Width: 240 mm

Thickness: 20 mm

Suitable for underfloor heating: Yes

Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.

Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.

Nail Fitting: Nail fixing is usually done via a nail gun, e.g Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.

See fitting information

Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.

Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.

Nail Fitting: Nail fixing is usually done via a nail gun, e.g Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.

Accessories

View

Wakol Adhesive MS230 18 Kg

FROM £79.17

View

Timbermate Excel Underlay (15.07m2 Per Roll) 23dB

FROM £50.00

View

Technics 5 Underlay (15.12m2 Per Roll) 28dB

FROM £89.16

View

Oak Premier Unsealed 210 x 20 mm

FROM £71.67

View

Oak Premier Unsealed 180 x 20 mm

FROM £67.92

View

Oak Premier Unsealed 160 x 20 mm

FROM £57.50

View

Oak Premier Unsealed 135 x 20 mm

FROM £55.00

View

Osmo Wash & Care 1 Ltr

FROM £10.83

View

Lecol PVAC Glue D3 0.75 Ltr

FROM £5.42

View

Bona Mega Sealer (Silk Matt) 5 Ltr

FROM £65.00

View

Lecol Filler 7500 5 Kg

FROM £43.33

View

Osmo Polyx-Oil Clear Satin (3032) 2.5 Ltr

FROM £61.67
Have no product in the cart!
0