Quarter Sawn Oak is the highest quality type of flooring cut from the tree, full of medullary rays you will find this unique characteristic in all of the finest oak products.
Narrow boards can be used effectively in all rooms and look particularly stunning in open warehouse style apartments and rooms with high ceilings. Traditional boards are about 125 mm wide, so any floor of this width will suit the proportions of older properties, especially those from the Victorian era.
Our overlay boards are designed to be laid over a subfloor, whether concrete or an existing wood floor. Once laid, this floor looks and feels the same as all of our beautiful wood flooring but cannot be used as a structural floor.
Oiled finishes are very popular as they have a natural look and feel, so simply add to the appearance of the wood.
Under Floor Heating
£41.66 / m2 + VAT
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.
Enter your details to calculate your meterage and cost.
Nail fixing is usually done via a nail gun, e.g Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.
Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.
Under Floor Heating
This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.
2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.
This product is supplied with a Factory UV Oiled surface. The Natural Wood Floor Company recommends that an additional coat of oil is applied to the surface prior to regular use.