Oak Smoked Brushed & White Oiled 189 x 15 mm

Engineered Flooring 189 mm x 15 mm

Oak is a highly popular species that is a real classic and is suitable for a wide range of finishes and appearances, so that you can achieve the style you want.

This Oak floor is smoked. This process infuses the Oak with Ammonia, giving a slightly grey tone consistently through it. The factory finish white oil derived from natural oils and waxes produces a light white hue, particularly in the grain of this brushed floor.

This engineered overlay floor is suitable for most types of fitting method including installation over under floor heating, but it cannot be fit as a structural floor due to the thickness.
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

£46.25 / m2 + VAT

Product codeOLSBW/189

This floor is one of a range of pre-oiled engineered flooring available in a variety of species and widths.

Suitable for most types of fitting method including installation over under floor heating.

It is recommended that all pre-oiled floors have an additional coat of oil after installation. Pre-oiled flooring is designed to be maintained by the customer rather than having to engage expert flooring contractors to periodically replenish the finish.

Product code: OLSBW/189

Grade: Rustic

Species: Oak

Group: Engineered Flooring

Category: Engineered Overlay


Type of Finish: Oiled - An additional coat is recommended.

Brushed: Light

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 8kg

Pack size: 2.82

Size: 189 x 15 mm

Width: 189 mm

Thickness: 15 mm


Suitable for underfloor heating: Yes

Nail Fitting: Nail fixing is usually done via a nail gun, e.g Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.

Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.

Pre-Oiled: This product is supplied with a Factory UV Oiled surface. The Natural Wood Floor Company recommends that an additional coat of oil is applied to the surface prior to regular use.


Have no product in the cart!
0