Oak White Mist Oiled 210 x 15 mm

Engineered Flooring 210 mm x 15 mm

The wide board format is perfect for large open spaces, as generous room proportions will enhance the quality and splendour of this floor’s gorgeous finish.

White Mist is a beautifully pale and calming design that mixes subtle grey and white hues, to create a floor that combines elements of softness and warmth. These qualities take on an extra dimension when mixed with the striking patterns found in the oak. This is a relaxed, easy-to-live-with floor that will go with anything.

Oak is a versatile species that takes pigments very well, so it lends itself well to pre-sealed flooring. The physical characteristics that give Oak its charm are still visible through the finish, so this floor has a naturally charming character and can be matched with the desired design scheme.

Our overlay boards are designed to be laid over a subfloor, whether concrete or an existing wood floor. Once laid, this floor looks and feels the same as all of our beautiful wood flooring but cannot be used as a structural floor.

The wide board format is perfect for large open spaces, as generous room proportions will enhance the quality and splendour of this floor’s gorgeous finish.

£57.08 / m2 + VAT

Product codeOLOWM/210

Order a sample
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to a ply subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory Oiled ready to use.
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor.

Product code: OLOWM/210

Grade: Millrun Grade, contains knots & Colour variation

Species: Oak

Group: Engineered Flooring

Category: Engineered Overlay


Type of Finish: Pre-oiled - An additional coat of oil is recommended.

Brushed: No

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 11kg

Pack size:

Size: 210 x 15 mm

Width: 210 mm

Thickness: 15 mm


Suitable for underfloor heating: Yes

Nail Fitting

Stick Down

Floating

Under Floor Heating

Engineered

Micro Bevelled

Pre-Oiled


Have no product in the cart!
0