Oak White-Washed Lacquered 180 x 20 mm

Engineered Flooring 180 mm x 20 mm

At the lighter end of the scale, our White Washed flooring has an almost opaque appearance, which allows the beauty of the natural wood to shine through. This floor has all the characteristics associated with Scandinavian design: simplicity and minimalism.

Oak is a versatile species that takes pigments very well, so it lends itself well to pre-sealed flooring. The physical characteristics that give Oak its charm are still visible through the finish, so this floor has a naturally charming character and can be matched with the desired design scheme.

Our engineered overlay wood flooring meets modern requirements and keeps a traditional wood flooring appearance. The multiple layers of plywood backing give support to the visible top layer of the precious hardwood, resulting in a floor that looks and feels like a solid wood floor but that is suitable for under floor heating and can still be sanded and re-finished after years of use. An overlay floor must be laid over an existing subfloor.
We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

£64.17 / m2 + VAT

Product codeOLWF/180

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, Factory lacquered ready to use

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.

Product code: OLWF/180

Grade: Millrun Grade, contains knots & Colour variation

Species: Oak

Group: Engineered Flooring

Category: Engineered Pre-Lacquered


Type of Finish: Pre-lacquered

Brushed: Light

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 15kg

Size: 180 x 20 mm

Width: 180 mm

Thickness: 20 mm


Suitable for underfloor heating: Yes

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.

Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Pre-Lacquered: This product is supplied with a Factory UV Lacquered surface. This product is suitable to walk on immediately.

Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.

Nail Fitting: Nail fixing is usually done via a nail gun, e.g Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.


Have no product in the cart!
0