Engineered Flooring 160 mm x 15 mm
Enter your details to calculate your meterage and cost.
Floor Size: 0m2
Packs: Variable pack size
Product codeOLOWF/160
Product code: OLOWF/160
Grade: Millrun
Species: Oak
Group: Engineered Flooring
Category: Engineered Overlay
Type of Finish: Pre-lacquered
Brushed: Light
Profile: Tongue and Groove
Specification: Bevelled Edge
Unit Weight: 12kg
Size: 160 x 15 mm
Width: 160 mm
Thickness: 15 mm
Suitable for underfloor heating: Yes
Nail Fitting: Nail fixing is usually done via a nail gun, e.g Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.
Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.
Pre-Lacquered: This product is supplied with a Factory UV Lacquered surface. This product is suitable to walk on immediately.
