Walnut Natural Lacquered 160 x 20 mm

Engineered Flooring 160 mm x 20 mm

Walnut is a beautiful dark and intense brown hardwood with a high-end look. This species is rich in detail and its warm tones are sure to bring a room to life.
The rich dark brown hues of Walnut combine with subtle tonal variations, resulting in a luxurious and unique floor.

Our engineered wood flooring meets modern requirements and keeps a traditional wood flooring appearance. The multiple layers of plywood backing give support to the visible top layer of the precious hardwood, resulting in a floor that looks and feels like a solid wood floor but that is suitable for under floor heating, can be laid over almost all types of sub floor, and can still be sanded and re-finished after years of use.

Our lacquered floors give a subtle boost to the wood surface but still retain a natural look and feel.

No fitting attributes for this product.

We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

£65.83 / m2 + VAT

Product codeWNF/160

Our engineered board has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, Factory lacquered ready to use

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.

Product code: WNF/160

Grade: Natural

Species: Walnut

Group: Engineered Flooring

Category: Engineered Pre-Lacquered


Type of Finish: Lacquered

Brushed: No

Profile: Tongue and Groove

Specification: Bevelled Edge

Unit Weight: 13kg

Size: 160 x 20 mm

Width: 160 mm

Thickness: 20 mm


Suitable for underfloor heating: Yes

Have no product in the cart!
0