Oak Cognac Oiled 240 x 20 mm 15.2m2

Engineered Flooring 240 × 20 mm

£50.00 + VAT

Product code: JOB/1928

A SET SQUARE METERAGE AT A FIXED PRICE
(Priced per m2)

THERE IS ONLY ONE JOBLOT OF 15.2m2 OF THIS PRODUCT!

Was £1386.00 Now £760.00 Excluding VAT

The rich red-brown tone of our Cognac oiled floor accentuates the intricate patterns and golden tones of the Oak itself, creating a beautiful and impressionable floor.

Oak is a versatile species that takes pigments very well, so it lends itself well to pre-sealed flooring. The physical characteristics that give Oak its charm are still visible through the finish, so this floor has a naturally charming character and can be matched with the desired design scheme.

Oil finishes penetrate into the wood to protect the timber and in doing so, enhance the grain. This adds depth to the wood’s natural appearance in the process.

The ply backing of an engineered floor with a hardwood veneer glued on top gives our engineered floors the same beautiful appearance of a solid wood floor but with superior construction, greater stability, and compatibility with under floor heating.

The wide board format is perfect for large open spaces, as generous room proportions will enhance the quality and splendour of this floor’s gorgeous finish.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2

Extra Margin: 10%

Total Area Required:

This product can only be purchased in whole packs

Packs: Variable pack size

Product code: JOB/1928

Species: Oak

Group: Flooring

Category: Engineered Flooring

Sub-Category: Joblot


Type of finish: Joblot

Brushed: Millrun

Profile: Oiled – An additional coat is recommended.

Specification: Light

Weight: 12 kg

Dimensions: 240 × 20 mm

Width: 240 mm

Thickness: 20 mm

Colour : Dark

Under Floor Heating : Tongue and Groove

Unit Measurement : Bevelled Edge

Design : Wide Boards (150mm – 300mm), Engineered


Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.

Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.

Nail Fitting: Nail fixing is usually done via a nail gun, e.g. Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.

Pre-Oiled: This product is supplied with a Factory UV Oiled surface. The Natural Wood Floor Company recommends that an additional coat of oil is applied to the surface prior to regular use.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.


Have no product in the cart!
0