30+ years in the industry
Manufactured by us
100% Natural Wood
Next Day Delivery Available
Flooring 490 × 70 × 11 mm
This flooring showcases a warm, golden oak tone with rich, expressive grain patterns that bring a sense of energy and movement to the surface. The planks feature a variety of natural wood characteristics, including tight swirls, cathedral arches, and scattered knots, all of which enhance the authentic, organic appearance. The finish maintains a natural matte sheen, allowing the texture and variation of the wood to stand out without appearing overly polished. This floor exudes a rustic yet refined charm, ideal for traditional or country-inspired interiors, where the beauty of natural wood takes center stage.
Our new Hybrid lacquered flooring is designed to be a highly durable low maintenance finish with a very natural feel and look.
Our engineered overlay wood flooring meets modern requirements and keeps a traditional wood flooring appearance. The multiple layers of birch plywood backing give support to the hardwood top layer, resulting in a floor that looks and feels like a solid wood floor but that is suitable for under floor heating which can still be sanded and re-finished after years of use.
Enter your details to calculate your meterage and cost.
Floor Size: 0m2
Extra Margin: 15%
Total Area Required:
This product can only be purchased in whole packs
Packs: Variable pack size
Our engineered Parquet Woodblock has been produced using WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.
The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.
Suitable for a fully bonded installation to a screed or ply subfloor. The unsealed block is supplied pre- sanded requiring only a light 100/120 grit sand to finish.
Compatible for use in conjunction with underfloor heating the woodblock complies with BS 8201:2011, rated in accordance with BS EN 13501-1
Product code: CH49011
Species: Oak
Finish: Lacquered
Brushed: No
Profile: Tongue and Groove
Specification: Bevelled Edge
Weight: 8 kg
Recommended Use: Domestic and Light Commercial
Pack Size: 1.03
Dimensions: 490 × 70 × 11 mm
Width: 70 mm
Thickness: 11 mm
Length: 490 mm
Colour : Natural
Type of finish : Lacquered
Under Floor Heating : Yes
Unit Measurement : per Square Metre
Design : 15mm Parquet & chevron, Engineered
Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. Boards can be Nailed, Stuck Down, or Floated depending on product type and sub floor. Parquet woodblocks must be stuck down. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.
Pre-Lacquered: This product is supplied with a Factory UV Lacquered surface. This product is suitable to walk on immediately.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.
