Flooring 135 × 19 mm
Made to order 4 -6 weeks lead time
This highly popular species is a real classic and is suitable for a wide range of finishes and appearances, so that you can achieve the style you want.
The bandsawn effect has a more rugged, textured surface, creating a very trendy appearance. This type of flooring gets its name from traditional sawing techniques and the marks that the saw left behind when it skimmed the surface of the wood.
Engineered wood floors are suitable for kitchens, bathrooms, utility rooms, and any other room in the house because of their greater stability and lower moisture level in the wood.
Narrow boards are a great option for smaller spaces, helping to open up the space to give it a larger appearance.
Unsealed products provide the flexibility to finish the wood in any colour once the floor is fitted. This can be anything from a clear sealer, to bring out the beauty of the wood, to a coloured finish to create an individual, bespoke feel. This is ideal for colour matching with an existing floor or simply to introduce a particular shade into a design scheme.
Please note that this is a special product that’s made to order, with an approximate lead time of 4-6 weeks. Please speak to one of our wood flooring experts for exact timings.
Enter your details to calculate your meterage and cost.
Floor Size: 0m2
Extra Margin: 10%
Total Area Required:
This product can only be purchased in whole packs
Packs: Variable pack size
Our engineered board has been produced using WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.
The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.
Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The unsealed board is supplied with a micro bevel along the length of the board, pre- sanded requiring only a light 100/120 grit sand to finish.
Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.
Product code: OLBSU/135
Species: Oak
Finish: Unsealed
Brushed: Light
Profile: Tongue and Groove
Specification: Bevelled Edge
Weight: 14.3 kg
Dimensions: 135 × 19 mm
Width: 135 mm
Thickness: 19 mm
Colour : Natural
Type of finish : Unsealed
Under Floor Heating : Yes
Unit Measurement : per Square Metre
Design : 20mm Boards, Engineered
Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.
Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.
Nail Fitting: Nail fixing is usually done via a nail gun, e.g. Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.