menu back
  • Reliable 30+ years in the industry
  • Quality Manufactured by us
  • Sustainable 100% Natural Wood
  • Speedy Next Day Delivery Available

Walnut Premier Unsealed 180 x 19 mm

Flooring 180 × 19 mm

£125.00 / m2 incl. VAT

Product code: WPRU/180
Product code: WPRU/180

This product is unsealed, giving you the opportunity to finish it as you like, using an oil to retain the warmer tones and characteristics of Walnut, or a lacquer to enhance the wood’s natural hues.

Sourced from safely managed forests in Northern America, Walnut is a popular species that adds character to any room with its rich and luxurious appeal. The rich dark brown hues of Walnut combine with subtle tonal variations, resulting in a luxurious and unique floor.

Engineered wood floors are suitable for kitchens, bathrooms, utility rooms, and any other room in the house because of their greater stability and lower moisture level in the wood.

Engineered
Floating
Micro Bevelled
Nail Fitting
Stick Down
Under Floor Heating

Enter your details to calculate your meterage and cost.



Floor Size: 0m2

Extra Margin: 10%

Total Area Required:

This product can only be purchased in whole packs

Packs: Variable pack size

Our engineered board has been produced using WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The unsealed board is supplied with a micro bevel along the length of the board, pre- sanded requiring only a light 100/120 grit sand to finish.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.

Product code: WPRU/180

Species: Walnut

Group: Flooring

Category: Engineered Flooring

Sub-Category: Engineered Board


Finish: Unsealed

Brushed: No

Profile: Tongue and Groove

Specification: Bevelled Edge

Weight: 14.3 kg

Dimensions: 180 × 19 mm

Width: 180 mm

Thickness: 19 mm

Colour : Dark

Type of finish : Unsealed

Under Floor Heating : Yes

Unit Measurement : per Square Metre

Design : 20mm Boards


Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. Boards can be Nailed, Stuck Down, or Floated depending on product type and sub floor. Parquet woodblocks must be stuck down. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.

Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.

Nail Fitting: Nail fixing is usually done via a nail gun, e.g. Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.


You may also like…

Have no product in the cart!
0