menu back
  • Reliable 30+ years in the industry
  • Quality Manufactured by us
  • Sustainable 100% Natural Wood
  • Speedy Next Day Delivery Available

Oak Old White Oiled 180 x 15 mm

Flooring 180 × 15 mm

£78.50 / m2 incl. VAT

Product code: OLOLDW/180
Product code: OLOLDW/180

For those who prefer the muted tones of natural wood, Old White is a stunning floor which boasts a delicate spectrum of creamy buttermilk shades mixed with the sandy tones of oak. Like all our flooring, Old White is manufactured using cutting edge techniques and is designed to last a lifetime.

Oak is a highly popular species that is a real classic and is suitable for a wide range of finishes and appearances, so that you can achieve the style you want.

Our Engineered overlays have the same beautiful look and feel of solid wood but with a much more efficient use of material.
Engineered overlay flooring can only be laid over an existing subfloor, not as a structural floor. Overlays are made up of a top layer of precious hardwood with a multi-layer ply backing, meaning this floor has the same beautiful appearance of solid wood but is a much more efficient and sustainable use of material.

Engineered
Floating
Micro Bevelled
Nail Fitting
Pre-Oiled
Stick Down
Under Floor Heating

Enter your details to calculate your meterage and cost.



Floor Size: 0m2

Extra Margin: 10%

Total Area Required:

This product can only be purchased in whole packs

Packs: Variable pack size

Our engineered board has been produced using WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to a ply subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory Oiled ready to use.
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor.

Product code: OLOLDW/180

Species: Oak

Group: Flooring

Category: Engineered Flooring

Sub-Category: Engineered Overlay


Finish: Oiled

Brushed: No

Profile: Tongue and Groove

Specification: Bevelled Edge

Weight: 11 kg

Dimensions: 180 × 15 mm

Width: 180 mm

Thickness: 15 mm

Colour : Light

Type of finish : Oiled – An additional coat is recommended.

Under Floor Heating : Yes

Unit Measurement : per Square Metre

Design : 15mm Boards, Engineered


Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. Boards can be Nailed, Stuck Down, or Floated depending on product type and sub floor. Parquet woodblocks must be stuck down. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.

Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.

Nail Fitting: Nail fixing is usually done via a nail gun, e.g. Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.

Pre-Oiled: This product is supplied with a Factory UV Oiled surface. The Natural Wood Floor Company recommends that an additional coat of oil is applied to the surface prior to regular use.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.


You may also like…

Have no product in the cart!
0