30+ years in the industry
Manufactured by us
100% Natural Wood
Next Day Delivery Available
Flooring 240 × 15 mm
A timber floor with a design aesthetic that combines grey hues and white grain textures, which can create a clean, contemporary appearance while still evoking a nostalgic feel. This type of colour palette is often used in interior design, furniture, and fashion, serving to strike a balance between modern and vintage styles.
Our new Hybrid lacquered flooring is designed to be a highly durable low maintenance finish with a very natural feel and look.
Our engineered overlay wood flooring meets modern requirements and keeps a traditional wood flooring appearance. The multiple layers of birch plywood backing give support to the hardwood top layer, resulting in a floor that looks and feels like a solid wood floor but that is suitable for under floor heating or sound reducing underlay which can still be sanded and re-finished after years of use.
The wide board format is perfect for large open spaces, as generous room proportions will enhance the quality and splendour of this floor’s gorgeous finish.
Enter your details to calculate your meterage and cost.
Floor Size: 0m2
Extra Margin: 10%
Total Area Required:
This product can only be purchased in whole packs
Packs: Variable pack size
Our engineered board has been produced using a Baltic WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.
The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.
Suitable for secret fixing to ply, battens or joist subfloor or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, Factory lacquered ready to use
Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.
Product code: SI24015
Species: Oak
Brushed: Light
Profile: Tongue and Groove
Specification: Bevelled Edge
Weight: 12 kg
Recommended Use: Domestic and Light Commercial
Dimensions: 240 × 15 mm
Width: 240 mm
Thickness: 15 mm
Colour : Light
Type of finish : Lacquered
Under Floor Heating : Yes
Unit Measurement : per Square Metre
Design : 15mm Boards, Engineered
Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. Boards can be Nailed, Stuck Down, or Floated depending on product type and sub floor. Parquet woodblocks must be stuck down. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.
Nail Fitting: Nail fixing is usually done via a nail gun, e.g. Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.
Pre-Lacquered: This product is supplied with a Factory UV Lacquered surface. This product is suitable to walk on immediately.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.
