30+ years in the industry
Manufactured by us
100% Natural Wood
Next Day Delivery Available
Flooring 180 × 15 mm
The rich dark brown colour of Walnut combines with its unique grain, resulting in a luxurious and breath-taking floor. Sourced from safely managed forests in Northern America, Walnut is a popular species that adds character to any room with its rich and luxurious appeal.
Engineered wood floors are appropriate for installation over under floor heating because of their stability and moisture content.
Engineered flooring can be fitted in most rooms in the house and laid on almost all types of subfloor.
Our lacquered floors give a subtle boost to the wood surface but still retain a natural look and feel.
Enter your details to calculate your meterage and cost.
Floor Size: 0m2
Extra Margin: 10%
Total Area Required:
Pack Size: m2
This product can only be purchased in whole packs
Packs: Variable pack size
Our engineered board has been produced using WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.
The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.
Suitable for secret fixing to ply subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, Factory lacquered ready to use
Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.
Product code: WOPRF/180
Species: Walnut
Finish: Lacquered
Brushed: No
Profile: Tongue and Groove
Specification: Bevelled Edge
Weight: 11 kg
Recommended Use: Domestic and Light Commercial
Dimensions: 180 × 15 mm
Width: 180 mm
Thickness: 15 mm
Colour : Dark
Type of finish : Lacquered
Under Floor Heating : Yes
Unit Measurement : per Square Metre
Design : 15mm Boards, Engineered
Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. Boards can be Nailed, Stuck Down, or Floated depending on product type and sub floor. Parquet woodblocks must be stuck down. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.
Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.
Nail Fitting: Nail fixing is usually done via a nail gun, e.g. Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.
Pre-Lacquered: This product is supplied with a Factory UV Lacquered surface. This product is suitable to walk on immediately.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.
