Engineered Flooring 500 × 100 × 20 mm
Chevron blocks are cut at an angle at both ends in contrast to parquet wood flooring, which has square ends. This creates the classic chevron zig zag pattern running along the floor. This is so popular that it can be found on almost anything; from fabrics and wallpapers to furniture and prints.
The ply backing of an engineered floor with a hardwood veneer glued on top gives our engineered floors the same beautiful appearance of a solid wood floor but with superior construction, greater stability, and compatibility with under floor heating.
Premier Oak has a more uniform and cleaner look that brings a refined elegance to a home. The lower knot content of premier Oak gives a more contemporary appearance.The versatile nature of Oak means this floor is perfect for all kinds of design scheme. From more traditional, natural looking styles to more contemporary, coloured finishes, Oak can be tailored to your preference.
This product is unsealed, giving you the opportunity to finish it as you like, using an oil to retain the warmer tones and characteristics of the wood, or a lacquer to enhance the wood’s natural hues.
Enter your details to calculate your meterage and cost.
Floor Size: 0m2
Extra Margin: 15%
Total Area Required:
This product can only be purchased in whole packs
Packs: Variable pack size
Our engineered Chevron has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.
The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.
Suitable for a fully bonded installation to a screed or ply subfloor. The Chevron block is supplied pre- sanded requiring only a light 100/120 grit sand to finish.
Compatible for use in conjunction with underfloor heating the woodblock complies with BS 8201:2011, rated in accordance with BS EN 13501-1
Product code: OLPRC/500
Type of finish: Parquet Woodblocks
Weight: 14 kg
Recommended Use: per Square Metre
Dimensions: 500 × 100 × 20 mm
Width: 100 mm
Thickness: 20 mm
Length: 500 mm
Colour : Natural
Under Floor Heating : Tongue and Groove
Unit Measurement : Non-bevelled
Design : Engineered, Parquet & Chevron
Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.