Engineered Flooring 400 × 100 × 19 mm
The versatile nature of Oak means this floor is perfect for all kinds of design scheme. From more traditional, natural looking styles to more contemporary, coloured finishes, Oak can be tailored to your preference.
Parquet can be used in any room in the home. It makes a fantastic first impression in hallways, brings an elegant charm to living rooms, and looks stunning in bedrooms.
Parquet suits all styles of décor and is completely versatile. In bedrooms, kitchens, living rooms, snugs, bathrooms, and hallways, parquet will always look the part.
Don’t be put off by parquet if you have a small or narrow shaped room. The pattern of the blocks can play with perspective helping to visually elongate or widen a room.
There are plenty of fitting options to consider, including the classic and universally adored herringbone pattern, in addition to attractive basket weave and brick designs. It all comes down to a matter of personal preference and the effect you want to create.
With an engineered floor, you get the same look and feel of a traditional solid wood floor but with the added benefits of more efficient use of precious materials, superior construction, and compatibility with under floor heating.
Unsealed products provide the flexibility to finish the wood in any colour once the floor is fitted. This can be anything from a clear sealer, to bring out the beauty of the wood, to a coloured finish to create an individual, bespoke feel. This is ideal for colour matching with an existing floor or simply to introduce a particular shade into a design scheme.
Enter your details to calculate your meterage and cost.
Floor Size: 0m2
Extra Margin: 15%
Total Area Required:
This product can only be purchased in whole packs
Packs: Variable pack size
Our engineered Parquet Woodblock has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.
The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.
Suitable for a fully bonded installation to a screed or ply subfloor. The unsealed block is supplied pre- sanded requiring only a light 100/120 grit sand to finish.
Compatible for use in conjunction with underfloor heating the woodblock complies with BS 8201:2011, rated in accordance with BS EN 13501-1
Product code: OLRW/400
Type of finish: Parquet Woodblocks
Weight: 13.5 kg
Recommended Use: per Square Metre
Dimensions: 400 × 100 × 19 mm
Width: 100 mm
Thickness: 19 mm
Length: 400 mm
Colour : Natural
Under Floor Heating : Tongue and Groove
Unit Measurement : Square End
Design : Engineered, Parquet & Chevron
Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.