Flooring 400 × 100 × 15 mm
Silver White’s cool, neutral tones combine the beautiful characteristics of wood with an up-to-date and modern twist. Featuring a lightly brushed surface, a subtle silver white oil works with the wood to highlight its distinctive grain patterns.
The final appearance combines a tactile and natural touch with a stunning fresh finish.
Enter your details to calculate your meterage and cost.
Floor Size: 0m2
Packs: Variable pack size
Our engineered Parquet Woodblock has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.
The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.
Suitable for a fully bonded installation to a screed or ply subfloor, factory Oiled ready to use.
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.
Compatible for use in conjunction with underfloor heating the woodblock complies with BS 8201:2011, rated in accordance with BS EN 13501-1
Product code: OWS/400
Species: Oak
Type of finish: Parquet Woodblocks
Brushed: Millrun
Profile: Oiled – An additional coat is recommended.
Specification: Light
Weight: 10.6 kg
Recommended Use: per Square Metre
Dimensions: 400 × 100 × 15 mm
Width: 100 mm
Thickness: 15 mm
Length: 400 mm
Colour : Dark
Under Floor Heating : Tongue and Groove
Unit Measurement : Bevelled Edge
Design : Parquet & Chevron, Engineered
Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.
Pre-Oiled: This product is supplied with a Factory UV Oiled surface. The Natural Wood Floor Company recommends that an additional coat of oil is applied to the surface prior to regular use.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.
