Flooring 280 × 70 × 20 mm
With its tumbled edges and soft worn appearance, our range of aged oak parquet has a convincingly antique look, which looks like it’s developed naturally over the years.
The advantages of modern manufacturing techniques mean that unlike original solid wood parquet, our engineered aged blocks can be used with underfloor heating.
With this floor, you get all the benefits of a modern floor with the looks, character and charm of a reclaimed floor.
Oak is a versatile species that takes pigments very well, so it lends itself well to pre-sealed flooring. The physical characteristics that give Oak its charm are still visible through the finish, so this floor has a naturally charming character and can be matched with the desired design scheme.
Parquet wood flooring is a great way to introduce pattern in a subtle, stylish and enduring way.
There are plenty of fitting options to consider, including the classic and universally adored herringbone pattern, in addition to attractive basket weave and brick designs. It all comes down to a matter of personal preference and the effect you want to create.
Oiled finishes are very popular as they have a natural look and feel, so simply add to the appearance of the wood. Oil finishes penetrate into the wood to protect the timber and in doing so, enhance the grain. This adds depth to the wood’s natural appearance in the process.
Enter your details to calculate your meterage and cost.
Floor Size: 0m2
Extra Margin: 10%
Total Area Required:
Pack Size: m2
This product can only be purchased in whole packs
Packs: Variable pack size
Our engineered Parquet woodblock has been produced using WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.
The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.
Suitable for a fully bonded installation to a screed or ply subfloor, factory Oiled ready to use.
*We advise that an additional coat is applied once this product has been laid.
Compatible for use in conjunction with underfloor heating the woodblock complies with BS 8201:2011, rated in accordance with BS EN 13501-1
Product code: OLAW/280
Species: Oak
Finish: Oiled
Brushed: No
Profile: Tongue and Groove
Specification: Square End
Weight: 13.3 kg
Recommended Use: Domestic and Light Commercial
Pack Size: .98
Dimensions: 280 × 70 × 20 mm
Width: 70 mm
Thickness: 20 mm
Length: 280 mm
Colour : Natural
Type of finish : Oiled – An additional coat is required.
Under Floor Heating : Yes
Unit Measurement : per Square Metre
Design : 20mm Parquet & Chevron, Engineered
Pre-Oiled: This product is supplied with a Factory UV Oiled surface. The Natural Wood Floor Company recommends that an additional coat of oil is applied to the surface prior to regular use.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.