30+ years in the industry
Manufactured by us
100% Natural Wood
Next Day Delivery Available
Accessories N/A
Water-based extra-matte dispersion care product. Gives extra-matt floors a new freshness and also enables the adaptation of semi-matt to extra-matt surfaces. Signs of wear are
concealed, dirt adhesion is reduced and subsequent cleaning is
simplified.
•
Preserves extra matt appearance
•
Suitable for adjusting the gloss level from semi-matt to
extra-matt
•
Protective coating against light scratches and signs of wear
•
Easy and safe application
•
Conceals signs of wear and tear and enhances the appearance
of floors
•
Simplified cleaning due to reduced dirt adhesion
Range of use:
Suitable care product for extra-matt and satin-finished hardwood floors, cork floor coverings, linoleum and PVC coverings.
APPLICATION TOOL / APPLICATION RATE
LOBA Wischwiesel 30-40 ml(g)/m2 = 25-35m2/l(kg) = 3-4 l/100
m2
DRYING TIME
•
Can be walked on after 1-2 hours.
•
Full traffic capability and coverage after 12 hours.
APPLICATION:
Material is pre-applied to the flooring in sections and then
applied in an even layer. Lay the applicator as flat as possible on
the floor and do not lift. Do not use pressure. Start at one side of
the room and then work from wall to wall towards the opposite
side of the room with the exit door. A room should always be
completely treated in one go. Never rework the floor while it is
drying since this can lead to streak formation.
STRIPPING:
The product can be removed again by stripping with LOBA Care Remover. For details, see the product’s technical information.
pH 8.6
Storage and
transportation
12 months of storage stability.
No hazardous material according to
ADR.
Store and transport between +5 to
+25°C. Protect from frost.
GISCODE GE10
APPLICATION TOOL / APPLICATION RATE
LOBA Wischwiesel 30-40 ml(g)/m2 = 25-35m2/l(kg) = 3-4 l/100
m2
DRYING TIME
•
Can be walked on after 1-2 hours.
•
Full traffic capability and coverage after 12 hours.
APPLICATION:
Material is pre-applied to the flooring in sections and then
applied in an even layer. Lay the applicator as flat as possible on
the floor and do not lift. Do not use pressure. Start at one side of
the room and then work from wall to wall towards the opposite
side of the room with the exit door. A room should always be
completely treated in one go. Never rework the floor while it is
drying since this can lead to streak formation.
STRIPPING:
The product can be removed again by stripping with LOBA Car-
eRemover. For details, see the product’s technical information.
Product code: LIC/1
Species: n/a
Group: Accessories
Category: Cleaning Products
Brushed: n/a
Profile: n/a
Specification: n/a
Weight: 1 kg
Recommended Use: n/a
Pack Size: 1
Type of finish : n/a
Unit Measurement : per Item
