Flooring 136 × 14 mm
£69.00 incl. VAT
Engineered overlay floors can only be laid over an existing subfloor, not as a structural floor. Overlays are made up of a top layer of precious hardwood with a ply backing, meaning this floor has the same beautiful appearance of solid wood but is a much more efficient and sustainable use of material.
With a 3mm thick wear layer and 14mm thick in total, this factory lacquered Ekowood floor is ideal for both floating and fully bonded installations.
The exotic yellows and browns of Merbau bring a beautiful richness to the home.
This species is a much more sustainable choice for high-end refurbishments as an alternative to timbers such as Mahogany or other exotic hardwoods.
This floor is manufactured in Malaysia to a quality standard that adheres to our high expectations.
The Ekowood 5G Clic system allows for quick and easy laying without the need for glue.
The Ekowood range is available in 3 Strip and 1 Strip wide plank.
Many floors in this range are suitable for under floor heating.
Enter your details to calculate your meterage and cost.
Floor Size: 0m2
Extra Margin: 10%
Total Area Required:
This product can only be purchased in whole packs
Packs: Variable pack size
14mm thick with a 3mm veneer and factory lacquered, Ekowood is ideal for both free floating and fully bonding installations.
Many floors from this range are suitable for installation over underfloor heating.
Also available in the following sizes:
Merbau Three Strip 195mm
This flooring is manufactured in Malaysia, adhering to our high standards of engineering.
Product code: MELS/136
Species: Merbau
Finish: Lacquered
Brushed: No
Profile: Click System
Specification: Non-bevelled
Weight: 11 kg
Recommended Use: Heavy Domestic and Commercial
Pack Size: 2.32
Dimensions: 136 × 14 mm
Width: 136 mm
Thickness: 14 mm
Colour : Dark
Type of finish : Lacquered
Under Floor Heating : Yes
Unit Measurement : per Square Metre
Design : 15mm Boards, Engineered
Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. Boards can be Nailed, Stuck Down, or Floated depending on product type and sub floor. Parquet woodblocks must be stuck down. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Engineered Click System: This 3 layer product has a 5G click joining system rather than a traditional Tongue & Groove. 3.5 mm Hardwood top layer.
Pre-Lacquered: This product is supplied with a Factory UV Lacquered surface. This product is suitable to walk on immediately.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.
See fitting information
Engineered
2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. Boards can be Nailed, Stuck Down, or Floated depending on product type and sub floor. Parquet woodblocks must be stuck down. All floors are Tongue and Groove with Ends Matched unless stated otherwise.
Engineered Click System
This 3 layer product has a 5G click joining system rather than a traditional Tongue & Groove. 3.5 mm Hardwood top layer.
Pre-Lacquered
This product is supplied with a Factory UV Lacquered surface. This product is suitable to walk on immediately.
Stick Down
Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
Under Floor Heating
This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.