Oak Chevron Millrun Unsealed 450 mm

Engineered Flooring 450 × 90 × 15.5 mm

£54.17 + VAT

Product code: OCOMU/450

Chevron blocks are cut at an angle at both ends in contrast to parquet wood flooring, which has square ends. This creates the classic chevron zig zag pattern running along the floor. This is so popular that it can be found on almost anything; from fabrics and wallpapers to furniture and prints.
The ply backing of an engineered floor with a hardwood veneer glued on top gives our engineered floors the same beautiful appearance of a solid wood floor but with superior construction, greater stability, and compatibility with under floor heating.

Premier Oak has a more uniform and cleaner look that brings a refined elegance to a home. The lower knot content of premier Oak gives a more contemporary appearance.The versatile nature of Oak means this floor is perfect for all kinds of design scheme. From more traditional, natural looking styles to more contemporary, coloured finishes, Oak can be tailored to your preference.

This product is unsealed, giving you the opportunity to finish it as you like, using an oil to retain the warmer tones and characteristics of the wood, or a lacquer to enhance the wood’s natural hues.

We recommend adding 7-10% m2 to the total area for board or strip floors, or 10-15% for parquet.

Enter your details to calculate your meterage and cost.



Floor Size: 0m2


Packs: Variable pack size

Our engineered Parquet Woodblock has been produced using a Russian WBP birch ply, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for a fully bonded installation to a screed or ply subfloor, factory Oiled ready to use.
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.

Compatible for use in conjunction with underfloor heating the woodblock complies with BS 8201:2011, rated in accordance with BS EN 13501-1

Product code: OCOMU/450

Species: Oak

Group: Flooring

Category: Engineered Flooring

Sub-Category: Parquet Woodblocks


Type of finish: Parquet Woodblocks

Brushed: Millrun

Profile: Unsealed

Specification: No

Weight: 11 kg

Dimensions: 450 × 90 × 15.5 mm

Width: 90 mm

Thickness: 15.5 mm

Length: 450 mm

Colour : Light

Under Floor Heating : Tongue and Groove

Unit Measurement : Non-bevelled

Design : Parquet & Chevron, Engineered


Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood. Can be Nailed, Stuck Down, or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.


You may also like…

Have no product in the cart!
0